Hi, I have Simpson Eziset 950 washing machine. After one successful load this morning the machine is now indicating the lid is open (when it is closed) and will not fill or start the next load. I have 9 chidren, so there is a lot of washing to get through each day. Please help! :-)
Already Tried: I have tried turning the machine on and off, lifting and closing the lid.
This is a faulty lid switch, and Simpson have a recall on some models, so you will need to have the full Model Code and Serial number to see if you qualify (even out of warantee)There is a sticker on the rear of the control panel with the codes required and details of where to look are also listed here with Recall Details:http://www.simpson.com.au/ProductRecallsSimpson Service Centre locator:http://www.simpson.com.au/ServiceLocatorBest WishesMartyn
Is there anything I can do in the meantime to try and get it to work?
The switch is a safety cut off, so if the circuit is broken, the default is OFF and there is no override I am afraid.
Experience: Troubleshoot & Tech