How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary
Gary, Australia Car Mechanic
Category: Australia Car
Satisfied Customers: 795
Experience:  Senior Technician
84449473
Type Your Australia Car Question Here...
Gary is online now
A new question is answered every 9 seconds

Dmax 09 no high beam it seem when high bean light comes on

Customer Question

dmax 09 no high beam it seem when high bean light comes on on inside makes no different to the lights
JA: Have you checked the bulbs and fuses?
Customer: fuses are ok not sure how to get the square fuse out under the bonnet
JA: What is the make/model of your car?
Customer: isuzu dmax 3 lt diesel twin cab ute 2009 LSM
JA: Are you fixing your Cab yourself? What have you tried so far?
Customer: I was seeing if I could find the problem looking at fuses etc.
JA: Anything else you want the mechanic to know before I connect you?
Customer: I have driving lights connected which up now have worked
Submitted: 4 months ago.
Category: Australia Car
Expert:  Gary replied 4 months ago.

Hi there,

Has this just happened after fitting your driving lights?

Gary

Customer: replied 4 months ago.
the driving lights were already on the car
Expert:  Gary replied 4 months ago.

Ok, so everything was working ok, and now no high beams?

I would remove one bulb to see if it has a blown high beam filament.

Possibly both bulbs are blown for high beam, does happen.

Gary

Customer: replied 4 months ago.
ok
will have look thanks
Customer: replied 4 months ago.
I checked and the spoties are working on high beam
Expert:  Gary replied 4 months ago.

The spotlights should only work when on high beam and a second switch in the dash is on.

If the second switch is off, so no spotlights, you should still have high beam bulbs in the headlights.

Blown high beam bulbs in the headlights?

Gary

Customer: replied 4 months ago.
the spotties have stopped working all together, there is no power getting to the high beam lights I followed the wire back to under the dash I guess the relay is under there somewhere, you may be able to tell me the colour of the wires.
thanks Ill check in tomorrow Sunday wa time
Expert:  Gary replied 4 months ago.

Hi again,

The high beam relay is in the underhood fusebox.

Can we see if it operates?

Gary

Expert:  Gary replied 4 months ago.

Hi Robbie,

Do you need any further help?

I hope my advice has been of assistance to you.

Kind regards

Gary

Related Australia Car Questions