How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Australia Car
Satisfied Customers: 21606
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
9825021
Type Your Australia Car Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

How is rear door trim fixed Need to acess window regulator

Customer Question

How is rear door trim fixed Need to acess window regulator 2006 model
Submitted: 2 months ago.
Category: Australia Car
Expert:  sprinkles08 replied 2 months ago.

Hello and welcome to JustAnswer!

This door panel uses mostly push-in clips.

The first thing that needs to be done is remove the two screws. There is one behind the handle and one in the pull cup.

Once the screws are removed then you'll need to disengage the clips. Using a door panel clip tool you'll get behind the panel and work your way around it popping the clips loose. Once the clips are popped loose then you can lift it up and off the glass run seal, reach behind and remove the rod from the handle.

Customer: replied 2 months ago.
Thanks, ***** ***** figured it could only be that way and successfully removed panel.
Was mainly worried about breaking something
Next step acquire replacement regulator!
Expert:  sprinkles08 replied 2 months ago.
Im glad you got the panel off!

Related Australia Car Questions