How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Fix_It_Man Your Own Question
Fix_It_Man
Fix_It_Man,
Category: Australia Car
Satisfied Customers: 17284
1627031
Type Your Australia Car Question Here...
Fix_It_Man is online now
A new question is answered every 9 seconds

I have a Nissan Pathfinder 2008, the engine light come on, I

Customer Question

I have a Nissan Pathfinder 2008, the engine light come on, I do a engine scanner and I got a few error.
1. Transmission GS
code P1815 Switch for manual program
2. 4WD electronics
code P1832
code P1831
code P1819 Transfer case control motor shutoff.
3. Central electr. CE 9.12.2
Code U1000 CAN Communication faulty
Submitted: 8 months ago.
Category: Australia Car
Expert:  Fix_It_Man replied 8 months ago.

Hello, my name is***** the light coming on how was the vehicle shifting?

Customer: replied 8 months ago.
the vehicle start up normal but when I push the gas pedal the vehicle moving slow
Expert:  Fix_It_Man replied 8 months ago.

THank you. And did this start intermittently or all of a sudden.

Customer: replied 8 months ago.
all of a sudden
Customer: replied 8 months ago.
happen in all of a sudden
Expert:  Fix_It_Man replied 8 months ago.

Thank you. I would start by checking the connections on the transfer case to make sure that there is not any moisture in them. I would then reset the computer and see if they come back. If they do then the computers need to be shut down and rebooted to see if they will communicate correctly. If that does not help then the transmission control module will need to be replaced.

Customer: replied 8 months ago.
how do i check the transfer case
Expert:  Fix_It_Man replied 8 months ago.

It is located under the vehicle and it attached to the transmission. You need to check the plugs on this?

Customer: replied 8 months ago.
how to reset the computer, and how to shut down and rebooted
Expert:  Fix_It_Man replied 8 months ago.

The computer can be reset with a scan tool by clearing the codes. If the reboot needs to be done then you would need the right Nissan scan tool to do so.