How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Australia Car
Satisfied Customers: 21440
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
Type Your Australia Car Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Mazda 3: 2010 mazda sp25 manul abs and traction control light

Customer Question

2010 mazda sp25 manul abs and traction control light is on but no codes
Submitted: 5 months ago.
Category: Australia Car
Expert:  sprinkles08 replied 5 months ago.
Hello and welcome to JustAnswer!There are two reasons the ABS and traction control lights will come on.If the ABS module sees an issue somewhere in the system that will prevent proper operation it will set a fault code and turn the lights on.Second would be if the ABS module wasn't communicating on the bus network. If it doesn't communicate then the instrument cluster will turn the ABS light on, but either way there are still going to be fault codes stored in other modules due to the lack of communication.One way or another, there are fault codes stored in at least one module.I'm assuming the reason you didn't find any codes was an equipment issue. What was the brand and model of what you used to check for codes?
Customer: replied 5 months ago.
Expert:  sprinkles08 replied 5 months ago.
Does it have a menu to pick what module you want to communicate with?

Related Australia Car Questions