How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Australia Car
Satisfied Customers: 21428
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
Type Your Australia Car Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Toyota LandCruiser: How do you fix derating in a 2010 landCruiser

Customer Question

How do you fix derating in a 2010 landCruiser 76 series
Submitted: 6 months ago.
Category: Australia Car
Expert:  sprinkles08 replied 6 months ago.
Hello and welcome to JustAnswer!How the problem will be repaired depends on what is causing the issue. I'm assuming that engine power is being reduced - limp in.There are many things that will cause the engine to go into limp in. Improper cam timing or a loss of cam sensor signal can cause it, but the problem is likely related to electronic throttle control. An issue with the accelerator pedal position sensor throttle body, wiring, or a perceived vacuum leak or intake restriction will also cause it.If the engine is going into limp in it's because the engine controller is seeing an issue that will prevent proper operation and is setting a fault code. The first step in diagnosing the problem will be to use a scan tool or code reader to see what fault codes are setting, and then testing can be done based on that.

Related Australia Car Questions