How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary
Gary, Australia Car Mechanic
Category: Australia Car
Satisfied Customers: 745
Experience:  Senior Technician
84449473
Type Your Australia Car Question Here...
Gary is online now
A new question is answered every 9 seconds

How to fit a power steer pump on a 99 holden rodeo v6

Customer Question

how to fit a power steer pump on a 99 holden rodeo v6
Submitted: 8 months ago.
Category: Australia Car
Expert:  Gary replied 8 months ago.

Hi there,

Can you see a steel sleeve in the bracket which slides in when the bolts are tightened?

A small pry forward on the sleeves allows the pump to go in easily.

Gary

Customer: replied 8 months ago.
i did a timing belt and had to move pump out but now hard to start bolts i removed the 2x 12mm bolts and the 14mm bolt but cant start them and its tight
Expert:  Gary replied 8 months ago.

That is correct, you have to move the pump to do a timing belt.

Are you using a deep socket on the bolts?

Sometimes a mirror helps as well.

If you are having trouble with the power steering pump, are you quite sure with the timing belt installation?

Gary

Expert:  Gary replied 8 months ago.

Hi again,

I hope my advice has been of assistance to you.

Kind regards

Gary

Related Australia Car Questions