Australian Car Repair Issues? Ask an Auto Mechanic for Answers ASAP
code description is manifold absolute pressure sensor circuit, this sensor provides information to the computer about charge pressure, without it computer disables turbocharger boost, check wiring going to it, if its ok most likely its MAP bad sensor. if you have simple obd2 scanner you can view life data to confirm life reading from sensor, key on engine off should give you atmospheric pressure reading so around 1 bar or 14,7 psi when you start it up should increase whit rams, also if codes came back right away means sensor circuit is open, and there will be no change in data
where is it located and what does it look like?
ill send u diagram in couple minutes,
Also pin voltage read out at the sensor connector
Are you still there
hi, sorry I didn't get back to you yesterday, I was out of the shop already,
Ok, it's too late now, the car is not in my position anymore. Thank you