How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Scott Your Own Question
Scott
Scott, Master Mechanic
Category: Australia Car
Satisfied Customers: 251
Experience:  30 yrs experience with Aussie, Japanese & British cars
29644491
Type Your Australia Car Question Here...
Scott is online now
A new question is answered every 9 seconds

Need belt configuration on Stiga sd9813 ride on

Customer Question

Need belt configuration on Stiga sd9813 ride on mower..........belt has come off and know know how or where to put around pulleys
Submitted: 12 months ago.
Category: Australia Car
Expert:  Scott replied 12 months ago.

Hi there,
The attached pic may help. It's for the Stiga SD series mowers - there's some variation across the range, so if this one doesn't resemble yours, let me know & I'll see what I can dig up. Note how the flat faced pulleys contact the flat back of the belt, & the vee pulleys engage with the vee side of the belt. You will either have to remove the centre bolt from the idler pulley to refit, or fight the tensioner spring..
I hope this helps!
Cheers
Scott

Customer: replied 12 months ago.
Scott nothing like ours belt feeds from both sides.....to a front and back pulley
Expert:  Scott replied 12 months ago.

Hi again,
Is it a twin cutter deck? I'm missing something here..