How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Australia Car
Satisfied Customers: 21604
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
9825021
Type Your Australia Car Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

2011 ford falcon xr6. comes up transmition fault not going

Customer Question

2011 ford falcon xr6. comes up transmition fault not going into 6th gear
Submitted: 1 year ago.
Category: Australia Car
Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to JustAnswer!

The trans controller has seen an issue that can cause damage or it thinks it doesn't have complete control and is setting a fault code. This is why you see the warning. There are many possible causes for this including internal transmission issues, speed sensors, solenoids, wiring, and even the trans controller itself. If the problem happens only when attempting a shift into sixth gear then that may indicate a clutch or geartrain issue in the trans.

The first step in diagnosing the problem will be to use a scan tool to see what fault codes are setting in the trans controller and go from there.

Related Australia Car Questions