Australian Car Repair Issues? Ask an Auto Mechanic for Answers ASAP
First i suggest they check for transmission malfunction codes .
If it goes into limp mode (safe mode) then there is going to be malfunction codes stored in the TCM.
Could be anything from a PNP switch to a input speed sensor .
Was the fluid checked for correct level and condition ,should still be a nice clear red to a very light clear brown .
if needed please get back to me with the reply button, and not the poor or bad service, this way i can get back to you or suggest another expert if needed.
Your deposit does not pay me until the answer is rated in a positive way,A bad rating does not constitute a refund.
If you are not happy or you have sorted out your problem before the answer then please let me know with the reply button .
Kind regards Greg.
Just checking in to see if you still need assistance with this issue .
Kind regards Greg