How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary
Gary, Australia Car Mechanic
Category: Australia Car
Satisfied Customers: 743
Experience:  Senior Technician
84449473
Type Your Australia Car Question Here...
Gary is online now
A new question is answered every 9 seconds

My vx won't start my lights blew wen I t gh beam so swapped

Customer Question

Hi my vx won't start my lights blew wen I hit high beam so swapped abs fuse with lights got lights back then tried to turn over no kick them found out my mate was pulling on fuse that's bolted in so checked & yes it looks like may have pulled to much! Wat can I do
Submitted: 1 year ago.
Category: Australia Car
Expert:  Gary replied 1 year ago.

Hi there,

Unfortunately more than likely the bolt-in fuse has been damaged and will need to be replaced.

Hope this helps.

Gary

Expert:  Gary replied 1 year ago.

Hi again,

Have you got to replace the bolt-in fuse as yet?

Gary

Related Australia Car Questions