How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Billy Your Own Question
Billy
Billy, Trainer/ Master Technician
Category: Australia Car
Satisfied Customers: 3498
Experience:  Trainer 8+ years, master tech. 10+ years, SAE member
30385560
Type Your Australia Car Question Here...
Billy is online now
A new question is answered every 9 seconds

Grand cherrokee: 2003 jeep grand cherrokee 2.7 dieselcan

Customer Question

2003 jeep grand cherrokee 2.7 diesel
can head be removed in enginebay
not much clearance at rear
thanks PETER
Submitted: 1 year ago.
Category: Australia Car
Expert:  Billy replied 1 year ago.
Hello Peter and Welcome! I'm Billy and i will assist you with your inquiry. Feel free to ask if any further info is needed.
My apologies for the delay, thank you for your patience.
There are two bolts at the back, which make it a hell of a job, removing the head with engine in place.
It would be much easier to remove the engine first, and then remove the head.
I will supply the torque specs and the timing diagram, as those would be needed on this job:
https://drive.google.com/file/d/0B6Zgf4dbmODzN0NGQVBIZ0pOZW8/view?usp=sharing
Thank you for your trust! Get back to me if you need more assistance...Thank you in advance for the positive rating...
regards,
Billy