Recent Feedback
how to remove plenum on a v6 3.5 ltr terracan and are there any gaskets required
This is for the 3.3 but same process .ClickHereHoped this helped . Bonuses greatly appreciated. Please click excellent service so I get credit for my help thanks . Anything lower is negative feedback . If you need further assistance please let me know thanks !
this vehicle is a 3.3 ltr toyota and not very much like a terracan.I have changed the spark plugs without removing the plenum ., but I wanted to know how to remove the plenum to gain extra room to replace the 3 ignition leads that run around the back of the engine to the coil packs on the other 3 spark plugs
On that shows how to remove the intake plenum it's the same set up . You can also try is access the rear spark plugs and coils by removing the pcv valve and hose from the passenger side rear valve cover-if you don't have large hands there is plenty of room between the intake and valve cover to remove the plugs/coils by reaching your hands under the intake from either side at the rear. These would be the next steps . Hoped this helped . Bonuses greatly appreciated. Please click excellent service so I get credit for my help thanks . Anything lower is negative feedback . If you need further assistance please let me know thanks !
Experience: Qualified to repair all makes and models.