How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Audi
Satisfied Customers: 35266
Experience:  ASE Certified Tech
7276279
Type Your Audi Question Here...
Ron is online now
A new question is answered every 9 seconds

I got audi a4 2.4L 2003 model b6, I have replace the gear

Customer Question

Hello I got audi a4 2.4L 2003 model b6, I have replace the gear box but even the new one still have some problem at first it say clutch adaptation and now is the code P0722 P0730 P0716 can you help me?
Submitted: 7 months ago.
Category: Audi
Expert:  Ron replied 7 months ago.

Hello. My name is ***** ***** I am happy to assist you today. Give me just a moment to review your post, and I'll be right back with the help you need.

Expert:  Ron replied 7 months ago.

Hello, my name is ***** ***** I am a professional here at Just Answer. I have noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here. Audi is aware of this concern and has published a Service bulletin (#2012154/10 or 37-07-15) about an updated control module. The bulletin states to replace the Transmission Control Module (TCM) located in the tail end of the transmission. I have enclosed the bulletin in the link below for your review.

https://dl.dropboxusercontent.com/u/104923897/Audi%20Service%20bulletin%20Nov%2022.pdf

Customer: replied 7 months ago.
If you replace the tcm how do you do the adaptation? The say you need some code or what?
Expert:  Ron replied 7 months ago.

You will need access to a dealer scan tool.

Customer: replied 7 months ago.
You can just replace the TCM without update ?
Customer: replied 7 months ago.
How dô you do the update?
Customer: replied 7 months ago.
Only dealer can do that?
Expert:  Ron replied 7 months ago.

Unfortunately the update will need to be done when replacing the TCM and yes if you do not have access to the proper scan tool and there software then yes the dealer will need to do this for you.

Customer: replied 7 months ago.
I have the vdcs diagnostic computer
Expert:  Ron replied 7 months ago.

Okay then all you need it the updated software.

Customer: replied 7 months ago.
The dealer the are very expensive they asking the price of the value of the car
Customer: replied 7 months ago.
Do you have the update software
Expert:  Ron replied 7 months ago.

Unfortunately I do not have the software.

Customer: replied 7 months ago.
Ok that all...
Expert:  Ron replied 7 months ago.

Thank you.