How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AudiDoc Your Own Question
AudiDoc, Independent Audi Shop Owner
Category: Audi
Satisfied Customers: 1695
Experience:  I've been working on Audis since I was 18 and own an independent Audi repair and performance shop
Type Your Audi Question Here...
AudiDoc is online now
A new question is answered every 9 seconds

2000 audi a6 2.7t cylinder 6 misfires but only under a load

Customer Question

2000 audi a6 2.7t
cylinder 6 misfires but only under a load
no misfires at idle or rev it up
but put it in gear and misfires start
Submitted: 3 months ago.
Category: Audi
Expert:  Wolfgang replied 3 months ago.

Thanks for choosing Just Answer . I'm Wolfgang here to help!!

I am confident we can resolve your problem together. Please
understand that I don't know your skill level. In most cases when you have a problem
with the way the vehicle performs, specialized tooling is required to acquire computer
data/information or engine testing results. We didn’t build these complicated vehicles; we
just diagnose and fix them. Also understand that I can't see, smell, hear, or touch the
vehicle either, so it may take a few replies to get to satisfactory results. I am also going to
direct you with the fastest, easiest and most common things to check first. Please be
patient and permit me to do what I do best.
I also try to give all of the information you may need, expecting a “positive rating” in
return. I will also continue assisting you after you have rated me, if necessary. If there
is any reason I cannot get a positive rating, please let me know why “in advance”, so I
can go another direction for you. I am sorry you’re having this problem; I’ll help you
through it.
Below is my first answer or request for more information. If you do not understand it, or you need more information from me, or need me to go in more detail.

Mark did you swap the coil and plug to see if it follows?

Customer: replied 3 months ago.

changed out plug and coil

runs fine at idle or high rpms not in gear

vagcom misfire count is zero

then u put it in gear and under load and misfire counter goes way up

Expert:  Wolfgang replied 3 months ago.

compression test of that cylinder and the adjacent cylinder? what happens if the coil is sprayed with water? and the wire while idling?

Customer: replied 3 months ago.

hit it with water no change at idle

Expert:  Wolfgang replied 3 months ago.

but no coil swap and plug . i know it is buried!!!

Related Audi Questions