How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Audi
Satisfied Customers: 34182
Experience:  ASE Certified Tech
7276279
Type Your Audi Question Here...
Ron is online now
A new question is answered every 9 seconds

I'm curious..I'm lost with the whole flaps and vacuum

Customer Question

I'm curious..I'm lost with the whole flaps and vacuum hoses..I have p2006 etc closed...p2007 closed..I have a 2011s5 and cel is on and them codes came up..where do I start
Submitted: 1 year ago.
Category: Audi
Expert:  Ron replied 1 year ago.

Hello, my name is ***** ***** I am a professional here at Just Answer. I have noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.

The codes P2006 and P2007 can be set due to any of the following,

  • Insufficient Engine Vacuum
  • Defective Intake Flap Motor V157
  • Failed Intake Flap Motor V157 Wiring
  • Defective Intake Manifold Runner Position Sensor 2 G512
  • Failed Intake Manifold Runner Position Sensor 2 G512 Wiring
  • Defective Intake Manifold Runner Position Sensor G336
  • Failed Intake Manifold Runner Position Sensor G336 Wiring
  • Defective Intake Manifold Tuning Valve N316
  • Failed Intake Manifold Tuning Valve N316 Wiring
  • Leaking Vacuum Hose

    In order to determine what is failing you are going to need to do some testing. I have enclosed the test steps in the link below, copy and paste the link to your browser to open and view it.

    https://dl.dropboxusercontent.com/u/104923897/P2006%20JAn%2012.pdf

Related Audi Questions