How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Audi
Satisfied Customers: 21609
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
9825021
Type Your Audi Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

I got a jerk on reverse gear activation dianostic reveals

Customer Question

I got a jerk on reverse gear activation dianostic reveals codes 01602, 04759,
04243, 08826 Can any od these cause the jerk
Submitted: 1 year ago.
Category: Audi
Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to JustAnswer!

If it goes into reverse hard then the transmission may be in limp in. The trans will go into limp in if the trans controller sees an issue that can cause potential damage or it thinks it doesn't have complete control. There are many possible causes for limp in including solenoids, wiring, internal transmission, speed sensors, and the trans controller itself.

I don't have any reference for any of the codes you listed for the vehicle listed. What module did you find these in?

Related Audi Questions