How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 20770
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I took the control knob off to replace lid switch and a wire

Customer Question

I took the control knob off to replace lid switch and a green wire with a flat connector came loose I do not know where it goes. there are two coming out of control know back one is attached to screw on frame other has a flat clip
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: two days
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: I just need to re attach wire so I can test washer
JA: What's the make and model of your washing machine? And can you guesstimate how old it is?
Customer: lat9806aae
Submitted: 3 months ago.
Category: Appliance
Expert:  Kelly replied 3 months ago.

Thanks for counting on us to help with your appliance problem. My name is ***** ***** I look forward to helping you!

Expert:  Kelly replied 3 months ago.

The flat connector clips over the edge of the control panel, it is ground wire. Look for the scratch marks, it just clips onto the panel.