How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 21148
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I have maytag ref problem Wasn't working before replaced HV

Customer Question

HI there
JA: Hi. What seems to be the problem?
Customer: I have maytag ref problem Wasn't working before replaced HV board
JA: Can you guesstimate how old your Maytag is? And just to clarify, what's the exact model?
Customer: MFI2067AES5
JA: Do you plan on doing the work yourself?
Customer: P/n w103102240p
JA: Anything else we should know to help you best?
Customer: After the board installed despanser screen shows up 888.888 I won't be able to do the program
Submitted: 4 months ago.
Category: Appliance
Customer: replied 4 months ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Customer: replied 4 months ago.
Hi
Customer: replied 4 months ago.
Are you thee
Customer: replied 4 months ago.
There
Customer: replied 4 months ago.
Just request a question I m still waiting for response
Customer: replied 4 months ago.
Hello
Customer: replied 4 months ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  Kelly replied 4 months ago.

Thanks for counting on us to help with your appliance problem. My name is ***** ***** I look forward to helping you!

Expert:  Kelly replied 4 months ago.

Did you program the new board? It should have come with instructions.

Expert:  Kelly replied 4 months ago.

The programming instructions are attached. The code is on the model tag that will need to be programmed into the new control. Let me know how programming goes!

Customer: replied 4 months ago.
It's too late the job was cancelled you guys take so long to get me back
Customer: replied 4 months ago.
I m no longer needed and also I did not ask for instructions sheet my original question was unable to do the programing
Customer: replied 4 months ago.
Please make sure not getting charge thank you