How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
12064207
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

My maytag centennial washer goes through the wash cycle and

Customer Question

my maytag centennial washer goes through the wash cycle and after final spin the spin light stays on and lid lock starts to flash. after a few ninits
JA: Can you guesstimate how old your Maytag is? And just to clarify, what's the exact model?
Customer: the machine is about 3 yrs old but I can,
JA: Do you plan on doing the work yourself?
Customer: <yes
JA: Anything else we should know to help you best?
Customer: when the wash cycle ends instead of going to done the lidlock light strarts
Submitted: 5 months ago.
Category: Appliance
Expert:  Whrlp Master Tech replied 5 months ago.

Hello from Just Answer and the Appliance Category
My name is Woody.
I will be glad to assist you today.
I have been servicing ALL Major Brands of Appliances for 36 Years, I own my own Appliance repair Company
And I teach appliance repair at a local Community College.
I have over 100,000 plus in home repairs and over 80,000 internet repairs under my belt.
You will be paying me for my ANSWER to your Appliance Question,, Not for the repair of your appliance hence the name of this site Just Answer.
I will do my best to take the information that you provide to me and make a Diagnosis for you to be able to repair your own Appliance.

Can I please have the Full model number of the unit to better assist you ?

Now the model number is ***** the lid once the lid is opened so you may not be able to get it from the unit.

but it should be on the units Use and care booklet that came with the washer.

And from just what your saying now I would suspect that the lid lock /latch switch is the issue .

To were it is not unlocking the lid as designed once the cycle is complete.

Can you see if you have the Use and care booklet for a model number?

Related Appliance Questions