How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Tech Care Your Own Question
Appliance Tech Care
Appliance Tech Care, Appliance Technician
Category: Appliance
Satisfied Customers: 1443
Experience:  35+ Yrs Experience - 40,000+ 'Real World' Repairs
20893398
Type Your Appliance Question Here...
Appliance Tech Care is online now
A new question is answered every 9 seconds

I have a whirlpool duet front load and dryer is stuck on

Customer Question

I have a whirlpool duet front load and dryer is stuck on 'sensing '
JA: Can you guesstimate how old your Whirlpool is? And just to clarify, what's the exact model?
Customer: About 10 yrs old model ghw9150pw4
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: This just happened...previous load dried fine
Submitted: 3 months ago.
Category: Appliance
Expert:  Appliance Tech Care replied 3 months ago.

Sorry to hear you are having problems with your dryer :(

The problem is the relay on the main Computer board has shorted out . You will need to replace it.

https://www.repairclinic.com/PartDetail/Main-Control-Board/W10111606/1203139

Click the link above. The part is just under the top cover. Remove the screws along the back edge and slide the cover backwards. You will see it on the left side. Be careful removing the wires on the old control.

Expert:  Appliance Tech Care replied 2 months ago.

I noticed that you have not rated my answer on your dryer fro last Friday. Dis you have any additional questions that I can answer?

Thanks

Don

Customer: replied 2 months ago.
After replacing main computer board that did not solve issue. It was the heating element that was bad. So it cost me extra to replace something that did not need replaced.