How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Joel Swenson Your Own Question
Joel Swenson
Joel Swenson,
Category: Appliance
Satisfied Customers: 2084
Experience:  Owner at Scott's Appliance Repair
89799402
Type Your Appliance Question Here...
Joel Swenson is online now
A new question is answered every 9 seconds

How to remove bottom drawer of Maytag double drawer

Customer Question

How to remove bottom drawer of Maytag double drawer dishwasher
JA: Can you guesstimate how old your Maytag is? And just to clarify, what's the exact model?
Customer: Mdd800aws2
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: No, that's all I need
Submitted: 16 days ago.
Category: Appliance
Expert:  Joel Swenson replied 16 days ago.

Hello, I'm Joel and will be glad to help you today.

The model number you listed is not a good model number ,could you please double check that and give me the correct one so I can give you model specific instructions, thanks.

Customer: replied 16 days ago.
MDD800AWS2
Customer: replied 16 days ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Customer: replied 16 days ago.
Are u there?
Customer: replied 16 days ago.
Hello
Expert:  Joel Swenson replied 16 days ago.

Yes, thank you for giving me the model number information give me just one second getting your answer ready now, thanks.

Expert:  Joel Swenson replied 16 days ago.

1. Open bottom drawer.

2 . Push in clips and slide rails back 5" (12.7 cm). see image - click here for image

3. Lift drawer off slide rails.

I kindly ask at this time that you go ahead and click on the 5th star of the star rating system at the top of your page. Afterwards If you have any follow up questions they will be free and I will continue to help until you are completely satisfied. It's very much appreciated, Thank You!

Customer: replied 16 days ago.
Still trying to remove it
Expert:  Joel Swenson replied 16 days ago.

ok let me know if you get it or not, thanks.

Customer: replied 16 days ago.
Clips not moving back
Customer: replied 16 days ago.
He pushes the front clip and it won't slide back to the second clip
Expert:  Joel Swenson replied 16 days ago.

It may just be a little jammed tap it lightly with a hammer or some tool you can get to it with and see if that will loosen it up some.

Expert:  Joel Swenson replied 16 days ago.

here is a little better explanation of the process from the service manual - click here for image

Customer: replied 16 days ago.
It just is not releasing, should not be this hard to get it to release
Customer: replied 16 days ago.
Can't push white tab in an inch it only goes backward or forward
Customer: replied 16 days ago.
joel, it still just isn't releasing the tub
Expert:  Joel Swenson replied 16 days ago.

no you push the white tab in and while holding it in you push the rail back an inch or more so that the tub comes off the rail.

Expert:  Joel Swenson replied 16 days ago.

you do that for each side of the drawer then lift the drawer out.

Customer: replied 16 days ago.
Not allowing movement at all
Expert:  Joel Swenson replied 16 days ago.

ok well I will opt out and see if another expert might have any ideas to help.

Customer: replied 16 days ago.
Never seen anything like it! We have to be missing a step somewhere
Customer: replied 16 days ago.
Well, we got it out, but there is additional step. Front must be removed first exposing the clips!
Customer: replied 16 days ago.
No call needed

Related Appliance Questions