How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
12064207
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

Kenmore washer water level is too high or none at all. model

Customer Question

kenmore washer water level is too high or none at all.
model 110.45986401.serial number Css4013619replaced water level switch and check pneumatic line to switch
Submitted: 5 months ago.
Category: Appliance
Expert:  Kelly replied 5 months ago.

Thanks for counting on us to help with your appliance problem. My name is ***** ***** I look forward to helping you!

Expert:  Kelly replied 5 months ago.

Did you remove the pressure hose from the fitting at the bottom to see if there was "gunk" that may be plugging it?

Customer: replied 5 months ago.
i blew through it to make sure it was clear
Expert:  Kelly replied 5 months ago.

It probably is plugged at that connection. Can you remove the hose from the bottom area where it is connected and use a pipe cleaner (or similar, nothing sharp) and clean it out well and see if the behavior changes.