How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
12064207
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

GE dryer model #GTFS560GFWS Replaced the cilinoids gas dryer

Customer Question

GE dryer model #GTFS560GFWS
Replaced the cilinoids gas dryer
Got power to unit lights works the power button does nothing
Submitted: 6 months ago.
Category: Appliance
Expert:  Webb-Guy replied 6 months ago.

Hello and welcome to just answer my name is ***** ***** I will be the one to assist you. Are you saying when pressing the power button it will not start? If the button is not starting then the problem is with your control board and will need to be replaced. Let me know what specifically is happening?

Customer: replied 6 months ago.
The dryer was working then gradually it would stop after heating up. More and more often over time
Then just stopped completely
Expert:  Webb-Guy replied 6 months ago.

Yes that certainly sounds like the problem may be with your control board give me just a moment to look over a few things and I will be right back with you.

Expert:  Webb-Guy replied 6 months ago.

Can you double check that model number for me as well because I can not seem to locate your model with that number?

Customer: replied 6 months ago.
Gtds560gfws
GE 7-cu gas dryer with steam cycle
Expert:  Webb-Guy replied 6 months ago.

Ok so first things first when you shut the door do you hear a click noise that its locking?

Customer: replied 6 months ago.
Expert:  Webb-Guy replied 6 months ago.

ok so the door switch is good then. When you go to start a cycle are there lights lit up?

Expert:  Webb-Guy replied 6 months ago.

Are you able to change the settings?

Expert:  Webb-Guy replied 6 months ago.

Are you still there?