How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
12064207
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

I installed an LP kit in my dryer and the flame is erratic.

Customer Question

I installed an LP kit in my dryer and the flame is erratic. It rolls out of the combustion chamber and trips the safety. I tried adjusting the shutter. I called White Rogers and they confirmed that the valve will work on LP gas with regards ***** ***** column pressure. What else can I do?
Submitted: 1 month ago.
Category: Appliance
Expert:  Whrlp Master Tech replied 1 month ago.

Hello from Just Answer and the Appliance Catigory
My name is Woody.
I will be glad to assist you today.
I have been servicing ALL Major Brands of Appliances for 36 Years, I own my own Appliance repair Company
And I teach appliance repair at a local Community College.
I have over 100,000 plus in home repairs and over 80,000 internet repairs under my belt.
You will be paying me for my ANSWER to your Appliance Question,, Not for the repair of your appliance hence the name of this site Just Answer.
I will do my best to take the information that you provide to me and make a Diagnosis for you to be able to repair your own Appliance.

Can I please have the Full model number of the unit to better assist you ?

So you have replaced the burner orifice and turned the regulator cap also correct?

Customer: replied 1 month ago.
I installed the orifaca and the regulator stopper as they call it as per instructions. I also adjusted the shutter valve.
Model is Samsung
DV231AGW/XAA
Expert:  Whrlp Master Tech replied 1 month ago.

ok and I`m assuming that it worked just fine before or is this a brand new dryer?

Customer: replied 1 month ago.
Any answers?
Expert:  Whrlp Master Tech replied 1 month ago.

Are you seeing the questions that I am asking you??

This one was back on 10;20 a.m.

ok and I`m assuming that it worked just fine before or is this a brand new dryer?

Customer: replied 1 month ago.
10:13 was last response I see
Expert:  Whrlp Master Tech replied 1 month ago.

ok can you answer my question???

ok and I`m assuming that it worked just fine before or is this a brand new dryer?

Customer: replied 1 month ago.
it worked fine prior to this
Expert:  Whrlp Master Tech replied 1 month ago.

ok so you have now switched the gas supply From Natural to L/P And converted the unit.

Do you have the part number of the conversion kit that you used?

Customer: replied 1 month ago.
LPKIT-3/XAA
Expert:  Whrlp Master Tech replied 1 month ago.

I do not show that is a good part number.

Whom did you purchase the part from?

Expert:  Whrlp Master Tech replied 1 month ago.

I`m going to opt out in hopes some one else can assist you.

I do not find LPKIT-3/XAA as a good part number .

And the parts break down for DV231AGW/XAA does not show an L/P orifice kit

Expert:  Webb-Guy replied 1 month ago.

Hello a new expert here. So you installed the new kit and you said the flame is erratic now? Did you put the part on right? Is anything loose or get disconnected while doing this? It is the correct part for your unit by the way.