How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask applianceguy Your Own Question
applianceguy
applianceguy, Customer Service
Category: Appliance
Satisfied Customers: 1902
Experience:  Ten Years experience. Certified in most major brands Including Whirlpool Frigidaire maytag Amana.
9557001
Type Your Appliance Question Here...
applianceguy is online now
A new question is answered every 9 seconds

I'm trying to remove my dishwasher and its stuck in the

Customer Question

I'm trying to remove my dishwasher and its stuck in the back. What can I do to free it up?
Submitted: 8 months ago.
Category: Appliance
Expert:  applianceguy replied 8 months ago.
Does it have wheels on the back corners? Are you keeping the dishwasher or replacing it?
Expert:  applianceguy replied 8 months ago.
Is the top hitting the counter top? Or hose and wire keeping it in?
Customer: replied 8 months ago.
I don't know if it has wheels. I want to keep it, but if it breaks I wont care.
Expert:  applianceguy replied 8 months ago.
Can you tell if it is hitting the counter top? Have you disconnected drain hose, fill line and power supply?
Expert:  applianceguy replied 8 months ago.
Has a new floor been installed after dishwasher was in place?
Customer: replied 8 months ago.
no
Customer: replied 8 months ago.
I disconnected the hoseses and power cord
Customer: replied 8 months ago.
are u there?
Expert:  applianceguy replied 8 months ago.
Does it feel like it is hitting counter?
Expert:  applianceguy replied 8 months ago.
Look under unit with flashlight. See if there is wheels on back corners. If there are you may be able to remove them. If not you may have to pry up counter or use saw and cut the frame.
Expert:  applianceguy replied 8 months ago.
How far is it pulled out?