How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
12064207
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

I have a Maytag Centennial washer MVWC300XW1, when you do a

Customer Question

I have a Maytag Centennial washer MVWC300XW1, when you do a load of wash nad it finishes the cloths are still to wet to put in the dryer. If you reset it to spin & drain then it wilol be dry enough
JA: Can you guesstimate how old your Maytag is? And just to clarify, what's the exact model?
Customer: 3 years
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: everything else seems ok
Submitted: 2 months ago.
Category: Appliance
Expert:  Kelly replied 2 months ago.

Thanks for counting on us to help with your appliance problem. My name is ***** ***** I look forward to helping you!

Expert:  Kelly replied 2 months ago.

Are you able to remove the back panel from the machine to access the drain pump?

Customer: replied 2 months ago.
the machine is in the garage i'm in the house
Expert:  Kelly replied 2 months ago.

In the diagram at the link below, number 1 is the drain pump. Can you access it and remove the drain hose to see if there are any obstructions in the pump?

CLICK HERE

Customer: replied 2 months ago.
just send me the info then I can check it out
Customer: replied 2 months ago.
the machine drian fine
Expert:  Kelly replied 2 months ago.

Please allow me just a few minutes to prepare some information for you, thank you!

Expert:  Kelly replied 2 months ago.

If the clothes are still wet, it must not be draining fine. I suspect the pump may be partially obstructed and not draining all the way at first, hence the second spin cycle being necessary. Would you like information on accessing that pump for removal and inspection?

Customer: replied 2 months ago.
I know how to check the pump I'm telling you it is not the pump it is not spinning long enough
Customer: replied 2 months ago.
what the You just ripped me off for $28.00 for nothing

Related Appliance Questions