How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

GE front load wch6800jibb stops 1/4 way into cycle. Changed

Customer Question

GE front load wch6800jibb stops 1/4 way into cycle. Changed pressure sensor $85 + time same result. What to look for next? any ideas?
Submitted: 1 month ago.
Category: Appliance
Expert:  Joel Swenson replied 1 month ago.

Hello, I'm Joel and will be glad to help you today.

Follow the instructions below to enter service mode and give me the last reported error codes:

unplug the washer, plug it back in and within 30 seconds press signal-delay-signal-delay

rotate the dial until t02 is displayed and press start to rotate through codes. It will give you the last 10 stored error codes. Just need the last one which will be the first one displayed, thanks.

Related Appliance Questions