How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

I changed the control board on my Whirlpoll duet gas dryer,

Customer Question

I changed the control board on my Whirlpoll duet gas dryer, and now the display is locked, it is lit up but locked and end of cycle didn't work
JA: Have you tried power cycling the appliance -- unplugging it and leaving it off for a few hours?
Customer: Not yet
JA: Do you plan on doing the work yourself?
Customer: I did it already
JA: Anything else we should know to help you best?
Customer: What else mat it be
Submitted: 1 month ago.
Category: Appliance
Expert:  Joel Swenson replied 1 month ago.

Hello, I'm Joel and will be glad to help you today.
Please provide me with the model number of the unit you are needing help with so that I can give you model specific information, as soon as I get that information I will get your answer prepared as soon as possible. Thank you for your patience. Also please let me know the part number you replaced, thanks.

Customer: replied 1 month ago.
Whirlpool Duet sport gas dryer
Customer: replied 1 month ago.
The interface board is all lit and not responding to any command
Expert:  Appliance Guru replied 1 month ago.

Hello and thanks for using this service! If you are a JA Member I would like to personally thank you and welcome you back! I am Appliance Guru an extremely experienced tech on the site and I try to get to as many customers as I can. NOTE it takes time for me to type research and add links so please wait for me to respond back I can only do this so fast. Secondly, I do not know your skill level so please try and let me know if I am going beyond your knowledge or comfort zone thanks! I strive for a 5 star rating from everyone especially our JA members

Was the interface board working before you changed the board?

Customer: replied 1 month ago.
WDG8300SW0 whirlpool duet sport
Expert:  Appliance Guru replied 1 month ago.

OK which board did you change the CCU?

Related Appliance Questions