How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Shop owner
Category: Appliance
Satisfied Customers: 7577
Experience:  Degree, Mech. engr. shop owner. 51 years experience
23932409
Type Your Appliance Question Here...
Phil is online now
A new question is answered every 9 seconds

I recently purchased an amana air conditioner/heat pump

Customer Question

I recently purchased an amana air conditioner/heat pump PTH123G50AXXX. When I took the cabinet front off, a wire with a small white end attached to 1 pair of black wire fell out, the other end was plugged into terminal at IAT black. I would like to know where the white end is to be attached. On pg, 9 of the owner's manual, it shows terminal. So, where does white end go?
Submitted: 3 months ago.
Category: Appliance
Expert:  Phil replied 3 months ago.

Hello, sorry for the wait, the white end goes on a small clip (if it is not a clip itself) onto the front of the AC unit base pan, about 1/8" in front of the cooling coil.

We can go from there without any time limit if needed.