How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
12064207
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

My temperature controller wont adjust tried a new low

Customer Question

my temperature controller wont adjust tried a new low voltage board and control strip
Submitted: 3 months ago.
Category: Appliance
Expert:  Appliance Guru replied 3 months ago.

Hello and thanks for using this service! If you are a JA Member I would like to personally thank you and welcome you back! I am Appliance Guru an extremely experienced tech on the site and I try to get to as many customers as I can. NOTE it takes time for me to type research and add links so please wait for me to respond back I can only do this so fast. Secondly, I do not know your skill level so please try and let me know if I am going beyond your knowledge or comfort zone thanks! I strive for a 5 star rating from everyone especially our JA members.

Did you put a new interface in?

Customer: replied 3 months ago.
I have 52 years experience in heating & cooling and refrigeration
Expert:  Appliance Guru replied 3 months ago.

DId you install a new interface board on it?

Customer: replied 3 months ago.
I replaced the low voltage control right in front of the control compartment. I also replaced the touch pad strip. Where is the interface board.
Customer: replied 3 months ago.
All the voltages checked out on the original board D/C & A/C. So what's next.
Customer: replied 3 months ago.
what's up where is the interface board.
Expert:  Appliance Guru replied 3 months ago.

The board where you set the temps does not work correct?

Customer: replied 3 months ago.
That's right
Expert:  Appliance Guru replied 3 months ago.

So you changed that?

Customer: replied 3 months ago.
I did replace the control . I feel like I'm talking to my next door neighbor from the advise I'm getting so far.
Customer: replied 3 months ago.
Can you give me sharper answers and recommendations on what to do please. I'm starting to believe your a scam.
Expert:  Appliance Guru replied 3 months ago.

OK give me the part numbers that you changed I understand the issue but I still do not even know what you have changed out.

Customer: replied 3 months ago.
I replaced the universal low voltage board kit # pe974081 & the pe9050181
Expert:  Appliance Guru replied 3 months ago.

Ok thanks for that info, you need to replace the touchpad membrane to fix that issue....this part CLICK HERE Did you replace that part?