How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Tech Dave Your Own Question
Appliance Tech Dave
Appliance Tech Dave, Home Appliance Technician
Category: Appliance
Satisfied Customers: 2353
Experience:  30 years experience specializing in Whirlpool, KitchenAid and Kenmore
Type Your Appliance Question Here...
Appliance Tech Dave is online now
A new question is answered every 9 seconds

We have a maytag mod MHWZ600TK00 and SER HLU4426190 Our

Customer Question

We have a maytag mod MHWZ600TK00 and SER HLU4426190
Our washer does not finish it come up with 5d OR F-
if put on spin it will still stop with 7 minutes to go. The only way to shut it off is to unplug it and then you can open the door
please help
Submitted: 2 months ago.
Category: Appliance
Expert:  Appliance Tech Dave replied 2 months ago.

Hello Ken, this is Dave Sorry you are having problems. The code you see is sd and stands for suds. The control thinks there is suds in the washer. This can be caused by slow draining. If there is a restriction in the drain system the code will come up. The pump filter is behind the lower bottom front panel. The panel is held on with 3 screws down near the floor. The cap on the filter screws off, but you need to be ready to catch the water because all the water left in the tub will come out. There may be something in the filter slowing down the drain. Always unplug the washer before removing any panels. Please ask any follow up questions you have. Here is a link to a video showing changing a pump but hopefully just removing the filter and cleaning is all you need to do. There are other things related to the pressure switch that can cause this too but check this first. Dave Video

Expert:  Appliance Tech Dave replied 2 months ago.

Hello Ken. How did you do? Do you still need help?

Related Appliance Questions