Need Appliance Repair Help? Ask a Technician for Answers ASAP
Hello and thanks for using this service! If you are a subscription customer I would like to personally thank you and welcome you back! I am Appliance Guru an extremely experienced tech on the site and I try to get to as many customers as I can. I just picked up your question now. NOTE it takes time for me to type research and add links so please wait for me to respond back I can only do this so fast. Secondly, I do not know whether you are male/female, age or skill level so please try and let me know if I am going beyond your knowledge or comfort zone thanks! I strive for a 5 star rating from everyone especially our Subscription Customers!
That is a door lock issue, meaning the motor on the door lock is running but the switches on the door lock are not working signalling the board a position change. Often this is a bad stuck switch on the door lock assembly that causes that failure. Normally if you can get to the door latch motor assembly you can get to the switch and free them up and make them work fine again, they get sticky.
All I ask is please use the Star Rating Link at the top of your page before leaving, that is the only way I am paid anything through the site and that will also get you a DIRECT LINK emailed to you to get back to me!.....tips are greatly appreciated so thank you very much for using this service. If you have any other questions just post back to me here anytime!