How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ezekiel Your Own Question
Ezekiel
Ezekiel, Home Appliance Technician
Category: Appliance
Satisfied Customers: 261
Experience:  Appliance Repair Expert
91962359
Type Your Appliance Question Here...
Ezekiel is online now
A new question is answered every 9 seconds

How do I replace the water dispenser light bulb on model

Customer Question

How do I replace the water dispenser light bulb on model mf12568aes
Submitted: 5 months ago.
Category: Appliance
Expert:  Ezekiel replied 5 months ago.

hi I'm Ezekiel I will be doing my best for you are you available

Customer: replied 5 months ago.
do I need to get my phone and/or tools
Expert:  Ezekiel replied 5 months ago.

hi get a butter knife and wedge it between the front plastic panel on the dispenser and the wall then twist the knife the panel should pop outwards to you it snaps around the frame as you go

Expert:  Ezekiel replied 5 months ago.

let me know

Expert:  Ezekiel replied 5 months ago.

hi please rate me high as that's how the site pays me thanks

Customer: replied 5 months ago.
I got the frame off, after removing hex screws....I still don't see the light bulb or how to replace it
Expert:  Ezekiel replied 5 months ago.

now remove the black housing that has the wire harnesses on it

Expert:  Ezekiel replied 5 months ago.

should be in this mechanism according to schematics plus when you press the light button you can se or feel where the bulb is at

Customer: replied 5 months ago.
Disconnected the front, unplugged the board, removed the clear plastic protector, I see two clear squares, that I assume are the light bulbs, what kind of bulbs do I need? My manual does not say
Expert:  Ezekiel replied 5 months ago.

one second

Customer: replied 5 months ago.
It looks like it is a board with the lights. The board is connected to a wiring harness. I am thinking this may not be a part I can replace on my own
Expert:  Ezekiel replied 5 months ago.

yes that's the part its all one piece

Expert:  Ezekiel replied 5 months ago.

if you don't feel comfortable doing that then a technician may be necessary but atleast you know what part is needed

Expert:  Ezekiel replied 5 months ago.

the pic I sent you is it. please rate me high as that's the site pays me thanks good luck if you need further help please send me a reply

Customer: replied 5 months ago.
I don't see any picture.Do you have a part number?
Expert:  Ezekiel replied 5 months ago.

wpw10131128 part number