How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 18590
Experience:  Highly accurate diagnostician with over 30 years experience!
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

2 year old Blomberg washer model Wm87120nbl00 Won't run and

Customer Question

2 year old Blomberg washer
Won't run and blinks door when you try to start it. Replaced the door switch and same thing.
Control board?
Submitted: 3 months ago.
Category: Appliance
Expert:  Kelly replied 3 months ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you!

Please know that I am not compensated for my time by the site until you rate using the stars at the top of your page. A rating is appreciated once we get to the solution for your appliance issue, thanks!

Does the door lock or make any noise? Is the pump running?

Customer: replied 3 months ago.
No and no
Expert:  Kelly replied 3 months ago.

The main control is indeed likely faulty then if wiring between control and lock is in good order.

Customer: replied 2 months ago.
Hi Kelly,
How do I remove the knob off the front to replace the control?
Expert:  Kelly replied 2 months ago.

Typically, they just pull off but some have a retainer clip. I am not 100% certain on that model, though, so I am going to alert the others in case one knows for sure.

Related Appliance Questions