Need Appliance Repair Help? Ask a Technician for Answers ASAP
Hello and thanks for using this service, if you have been waiting do not worry or get upset. I am Appliance Guru an extremely experienced tech on the site and I try to get to as many customers as I can. I just picked up your question now. NOTE it takes time for me to type research and add links so please wait for me to respond back I can only do this so fast. Secondly I am not paid anything until you rate my service good using the STAR RATING LINK at the top of your page, the money is paid to the site not me directly.
That is a ERROR CODE F01The pump driver fails to activate/One of the main relays is not working properly/A communication error between the Central Control Unit (CCU) and the EEPROMonboard the CCU occurred.Check for loose power outlet. A loose power plug in the wall can createline noise and issues.- Check if washer is on a dedicated circuit. Other devices on same circuitcan create line noise and cause this issue.- Unplug washer or disconnect power.- Make sure that wire harness connections from the CCU are not broken or with wiresdetached, and that connector internal pins are visible.- Make sure all green wires (ground harness system) are not broken or detached.- Make sure the two ground switches are pressed correctly by the toe and rear panels.- Make sure all connectors are fully seated.- Plug in washer or reconnect power.- Check for power going to Central Control Unit (CCU) by listening for a click in theCCU when unit is plugged in washer or when reconnecting power.- Verify unit operation by performing the Diagnostic Test. See page 5.- After the diagnostic test has finished, unplug washer or disconnect powerand wait for 15 seconds.
Normally you need to replace the CCU to correct that issue.
All I ask is please use the Star Rating Link at the top of your page before leaving, that is the only way I am paid anything through the site and that will also get you a DIRECT LINK emailed to you to get back to me!.....tips are greatly appreciated so thank you very much for using this service. If you have any other questions just post back to me here anytime!