How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 18602
Experience:  Highly accurate diagnostician with over 30 years experience!
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

T5130 Tumble Dryer. Keep getting a 12:253 FAULT on display

Customer Question

T5130 Tumble Dryer.
Keep getting a 12:253 FAULT on display
"Jumper 1"
Question is; Where is jumper 1 and how do I close its contact?
Submitted: 3 months ago.
Category: Appliance
Expert:  Kelly replied 3 months ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you!

Please know that I am not compensated for my time by the site until you rate using the stars at the top of your page. A rating is appreciated once we get to the solution for your appliance issue, thanks!

Remove and reset each connector on all of the control components, looking for any issues with corrosion or connection issues. Let me know if anything changes, please.

The service manual for that unit is available below.


Related Appliance Questions