How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Tech Dave Your Own Question
Appliance Tech Dave
Appliance Tech Dave, Home Appliance Technician
Category: Appliance
Satisfied Customers: 2383
Experience:  30 years experience specializing in Whirlpool, KitchenAid and Kenmore
19941226
Type Your Appliance Question Here...
Appliance Tech Dave is online now
A new question is answered every 9 seconds

I have a maytag 4000 series front loader it stopped spinning

Customer Question

i have a maytag 4000 series front loader it stopped spinning so i took off the back panel and saw that the belt snapped so i took the belt off and ordered a new one, only too find when i went to put the belt back on the pulley will not move what is my next step "bearings ?
Submitted: 5 months ago.
Category: Appliance
Expert:  Appliance Tech Dave replied 5 months ago.

Hello, this is Dave. The problem could only be either bearings of something stuck between the tubs. If you use a flashlight and put your head in the drum can you see anything through the holes?

Expert:  Appliance Tech Dave replied 5 months ago.

Do you have an update?