How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 19080
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

How do I replace the abrasion ring on my kpg100 burr

Customer Question

How do I replace the abrasion ring on my kpg100 burr grinding mill? Part number(###) ###-####
Submitted: 5 months ago.
Category: Appliance
Expert:  Kelly replied 5 months ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you!

Please know that I am not compensated for my time by the site until you rate using the stars at the top of your page. A rating is appreciated once we get to the solution for your appliance issue, thanks!

The parts breakdown is below. Number 10 is the abrasion ring.

CLICK HERE

Disassembly and service information may be found at the link below.

CLICK HERE

Customer: replied 4 months ago.
there was nothing in the documentation you sent to my attention that I did not already possess from my original purchase from Sears. There are still no diagrams or instructions as to how to remove the abrasion ring w/o destroying the finish &/or part. Regards, RLB