How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 74433
Experience:  9+ years being an appliance technician with factory training.
13574879
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

Whirlpool Dishwasher Model dull45xtpb9 Serial

Customer Question

Whirlpool Dishwasher
Model dull45xtpb9
Serial ft5001884
Changed Heating Element approximately two months ago.
Changed Water Valve one week ago.
All lights on Control Panel working.
POOBLEM:
1) Fills with water slowly and while doing so, tries to start, but will not.
2) It does drain.
3) Tried resetting (heat dry-normal wash-heat dry normal wash within 5 seconds
4) Will not wash!
Submitted: 7 months ago.
Category: Appliance
Expert:  Tyler Z. replied 7 months ago.
Unfortunately you just have a bad circulation pump or something is jamming the impeller of the circulation pump. You can take the pump apart from the top down and see if anything is inside the sump jamming the impeller or disposal chopper, but other than that, below is a link to the circulation pump and motor assembly you'd need to order and replace for your model. There is a video at the bottom of the link which shows you how to replace the part. CLICK HERE for pump and video We are on the honor system here. Please remember to rate my service by selecting a star at the top of the screen before you leave today. If you need anything else, just let me know. You can continue asking follow-up questions at no additional charge after rating my service if you still need assistance.
Expert:  Tyler Z. replied 7 months ago.
Hello again. I'm just following up because I haven't heard back from you and I see this question is still open. Is there anything else I can help you with?