How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Medic Your Own Question
Appliance Medic
Appliance Medic, Home Appliance Technician
Category: Appliance
Satisfied Customers: 10831
Experience:  Factory Trained CFC Technician
13570846
Type Your Appliance Question Here...
Appliance Medic is online now
A new question is answered every 9 seconds

Where can we order a control board 's stove model

Customer Question

Where can we order a control board for Kenmore's stove model(###) ###-####
Sears no longer has this control panel.
Also do you know of a repair/appliance store near Vallejo, CA 94589 who can help us with this control board.
Thank you
Submitted: 1 year ago.
Category: Appliance
Expert:  Appliance Medic replied 1 year ago.
Hello, the control board part number###-##-####is NLA. The only way to repair the stove is to remove the board and send it in to corecentrics or circuit board medics. Both places repair this board for roughly $150. It's usually about a 1 week turnaround. You will need to find a company to come remove the board so you can send it in or you will need to remove the board. I do not know of a company in 94589 I'm located in WA State. This is a common repair though both those companies mentioned will be able to repair the board so you can keep your oven.
Customer: replied 1 year ago.
The control board number is(###) ###-####not###-##-####
Expert:  Appliance Medic replied 1 year ago.
The model number of the stove is(###) ###-#### ***** use the model number to get correct control board part number which for your model is###-##-#### *****###-##-####is the part number of the actual control board. The control board is no longer available and needs to be sent in to be remanufactured. No one stocks one on the shelf and haven't for several years. That board cost roughly $150 to have repaired.