How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
12064207
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

GE fridge/freezer model PSS25NGMDCC. Fridge was too cold so

Customer Question

GE fridge/freezer model PSS25NGMDCC.
Fridge was too cold so we replaced part #WR49X10091, the air inlet cover (aic).
While the old aic has sections of styrofoam cut out so that the cold air appeared to vent to the front, the new aic has solid styrofoam blocking the front but has openings on the side so I'm guessing the air vents that way instead.
I don't know if any of that matters, but since we replaced the part, the temps are off - freezer is -8 degress and fridge is 41 degrees.
Did we do something wrong?
Submitted: 8 months ago.
Category: Appliance
Expert:  Appliance Guru replied 8 months ago.
Hello I am Appliance Guru, Did you get it plugged in correctly and what was being blocked? This sounds like the vent port is still partially blocked are you sure you have it mounted correctly?