How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask bonzaco Your Own Question
bonzaco
bonzaco,
Category: Appliance
Satisfied Customers: 1464
Experience:  Owner at Dales Electronic
26760916
Type Your Appliance Question Here...
bonzaco is online now
A new question is answered every 9 seconds

I'm having a hard time installing a new rubber seal wb32k5050

Customer Question

i'm having a hard time installing a new rubber seal wb32k5050 that I ordered from GE. they said it was easy..... I have a JMS08 or10 drop-in oven?
Submitted: 1 year ago.
Category: Appliance
Expert:  Appliance Guru replied 1 year ago.
Hello and thanks for using this service, if you have been waiting do not worry or get upset. I am Appliance Guru an extremely experienced tech on here and I try to get to as many customers as I can. I just picked up your question now. Do you see the clips that hold it in place? ANSWER:
Customer: replied 1 year ago.
No
Expert:  Appliance Guru replied 1 year ago.
OK what are you seeing holding the piece in place?
Customer: replied 1 year ago.
Forget it!!! I'll call a repairman
Expert:  bonzaco replied 1 year ago.
Its fairly easy but you have to unbolt the oven slide it out and then replace the seal and slide it back in again to lock the seal in place.