How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 74348
Experience:  9+ years being an appliance technician with factory training.
13574879
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

Trying to read post on bypassing start button on Whirlpool

Customer Question

Trying to read post on bypassing start button on Whirlpool Duet washer.
Submitted: 9 months ago.
Category: Appliance
Expert:  Tyler Z. replied 9 months ago.

You unfortunately can not bypass the start button on the washer. The start button is part of the interface control board so you can remove the top panel, then remove the control panel and remove the interface board to see if there is something physically you can do to get the button to function properly again, but other than that, the entire front interface board would need to be replaced since the button is built into the board on this model I'm sorry to say.

We are on the honor system here. Please remember to rate my service by selecting a star at the top of the screen before you leave today. If you need anything else, just let me know. You can continue asking follow-up questions at no additional charge after rating my service if you still need assistance.

Customer: replied 9 months ago.
Thanks, Tyler.
Expert:  Tyler Z. replied 9 months ago.

Not a problem but I'm very sorry about the bad news.

Customer: replied 9 months ago.
Me, too.
Expert:  Tyler Z. replied 9 months ago.

If you need anything else just let me know.

Expert:  Tyler Z. replied 9 months ago.

Hello again. I'm just following up because I haven't heard back from you and I see this question is still open. Is there anything else I can help you with?