How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Sean F. Your Own Question
Sean F.
Sean F., Customer Service
Category: Appliance
Satisfied Customers: 202
Experience:  Appliance Tech at Appliance Repair
92140848
Type Your Appliance Question Here...
Sean F. is online now
A new question is answered every 9 seconds

I asked what E1 and F2 indicate? These are. What appeared.

Customer Question

I asked what E1 and F2 indicate? These are. What appeared. In my oven. It does not work. So what could be the problem?
Submitted: 9 months ago.
Category: Appliance
Expert:  Sean F. replied 9 months ago.

Can you please provide the model number off your unit?

Customer: replied 9 months ago.
GBD307PRB01 Whirlpool gold double wall oven
Expert:  Sean F. replied 9 months ago.

Press CANCEL. If error code returns after 60 sec let me know.

Customer: replied 9 months ago.
You said it can be repaired but did not indicate what the problem could be. I understand that it is a discontinued modelWhat is a compparable model that would have the same parts needed to repair my oven?
Expert:  Sean F. replied 9 months ago.

Did you do what I just asked a few mins ago?.

Expert:  Sean F. replied 9 months ago.

They stop making that model but you still can get parts for that unit.

Customer: replied 9 months ago.
I did not see your replying and I do not want to makes another call that will cost me another 18 dollars. This will add up to more than the Service fee of a technician.
Expert:  Sean F. replied 9 months ago.

Press CANCEL. If error code returns after 60 sec let me know

Customer: replied 9 months ago.
the error code keeps flashing when I push start.
Expert:  Sean F. replied 9 months ago.

No. press CANCEL. If error code returns after 60 sec let me know

Customer: replied 9 months ago.
You di
Expert:  Sean F. replied 9 months ago.

You said you pressed start.

Customer: replied 9 months ago.
You did not tell me if There are comparable parts from a newer model that can be uses to repair my oven.
Expert:  Sean F. replied 9 months ago.

Okay to be sure you need a touchpad you will need to take a part the oven to make sure the ribbon of the touchpad is connected firmly to the control board.

Customer: replied 9 months ago.
I pressed cancel and waited for 60 seconds like you said but it flashes back when I turn on the oven
Expert:  Sean F. replied 9 months ago.

Again...They stop making that model but you still can get parts for that unit.

Customer: replied 9 months ago.
Every part seem to be a circuit board inside. Are these circuit boards replaceble and available?
Expert:  Sean F. replied 9 months ago.

Yes.. you still can get parts for that unit.

Expert:  Sean F. replied 9 months ago.

I am get off for the night since it 11:00 pm and I have to get up at 5:00 am. I will check back in in the morning.

Customer: replied 9 months ago.
Sorry you are 2 hours ahead of our time here. Thanks and good night.
Expert:  Sean F. replied 9 months ago.

I am 95% sure you have a bad touchpad and 5% that the touchpad ribbon as come lose and not connected properly.

What your going to need to do is to take the panel down to make sure the touchpad is not lose.

Are you willing to try to take the unit apart?

Expert:  Sean F. replied 9 months ago.

Are you still needing help?

Related Appliance Questions