How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AppTech8579 Your Own Question
AppTech8579
AppTech8579, Home Appliance Technician
Category: Appliance
Satisfied Customers: 1552
Experience:  worked on appliances for around 10 years
76126576
Type Your Appliance Question Here...
AppTech8579 is online now
A new question is answered every 9 seconds

My Panosonic Model NN-SD697S Turns on but Shows H97 after it

Customer Question

My Panosonic Model NN-SD697S Turns on but Shows H97 after it runs for
abiut 15 seconds. No heat comes on.
Submitted: 1 year ago.
Category: Appliance
Expert:  AppTech8579 replied 1 year ago.

This fault code is telling you that the inverter board has failed and usually the magnetron fails causing the inverter to fail so you will need to replace both to fix this.

Using the Star Rating Chart at the top of your page and rating me at least a 3 star is how I receive credit for helping you. Please if you do not understand my answer, don't hesitate to ask for more help. BONUSES appreciated. Thank you for using Just Answer.