How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Guru Your Own Question
Appliance Guru
Appliance Guru, Owner and Technician
Category: Appliance
Satisfied Customers: 14025
Experience:  Over 15 yrs. experience with 10,000+ in home repairs.
21107370
Type Your Appliance Question Here...
Appliance Guru is online now
A new question is answered every 9 seconds

We had our oven turned to 500 to bake several pizza crusts

Customer Question

We had our oven turned to 500 to bake several pizza crusts and it apparently overheated and now there is nothing on the display, it's totally blank and the oven won't turn on. Dual fuel KDRP462LSS08
Submitted: 10 months ago.
Category: Appliance
Expert:  Appliance Guru replied 10 months ago.

Hello,

Check part #37 for continuity it is likely burned out, if so replace it, If you do not have a meter you can put the two wires to that part together and see if it comes on.

CLICK HERE

All I ask is please rate my service with the star rating system, thanks!

Customer: replied 10 months ago.
We replaced that part before we replaced the zodiac board and still nothing comes on.
Expert:  Appliance Guru replied 10 months ago.

Are you sure you have power to the unit at the terminal block?

Customer: replied 10 months ago.
The burners on the stove are gas and the igniters work so there is power getting to the unit
Expert:  Appliance Guru replied 10 months ago.

Did you replace part #

(###) ###-####/p>
Customer: replied 10 months ago.
The zodiac board we replaced is part(###) ###-####
Expert:  Appliance Guru replied 10 months ago.

Yes you need that other board the one I listed to fix it.

All I ask is please rate my service thanks

Customer: replied 10 months ago.
That part is not on the parts list for this range so I'm not sure about replacing it since I don't see it on this model.
Customer: replied 10 months ago.
We found help elsewhere. I will not order a part not already on my oven. That makes no sense. Thanks for your time but you did not answer our question.