How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Medic Your Own Question
Appliance Medic
Appliance Medic, Home Appliance Technician
Category: Appliance
Satisfied Customers: 10831
Experience:  Factory Trained CFC Technician
13570846
Type Your Appliance Question Here...
Appliance Medic is online now
A new question is answered every 9 seconds

Have propane duet model wgd9200sqo will not heat diastolic

Customer Question

Have propane duet model wgd9200sqo will not heat diastolic test shows P 39
What do I check
Submitted: 1 year ago.
Category: Appliance
Expert:  Appliance Medic replied 1 year ago.

Hello, does the thermal fuse have continuity? Does the igniter have continuity? Is the igniter getting 110v? You have a heat issue. The thermal fuse or igniter will be the issue. I work on the honor system here at Just Answers. I'm not credited for my work until you rate my answer positively using the star rating system at the top of your page. Thanks

Customer: replied 1 year ago.
cues has continuity igniter comes on no flame thermistor,thermistats check good
Moisture sensor good
Expert:  Appliance Medic replied 1 year ago.

Sounds like the gas is off or gas coils are bad.

Customer: replied 1 year ago.
Gas is on coils both show continuity but could be low do you believe valve bad ?
Started with bad thermistor pulled checked accidentally dropped checked ok put
Back did 3 loads quit replaced with new and check it and all sensors again!
Expert:  Appliance Medic replied 1 year ago.

Do you know how many amps the igniter is drawing?

Customer: replied 1 year ago.
8.7 to 8.9 but with meter plunged in flame lit 3 times perfect ?
Customer: replied 1 year ago.
Could have removing coils and reinstall jarred them to work ? Now working fine
Expert:  Appliance Medic replied 1 year ago.

Yes, I would suspect faulty coils like previously stated. I work on the honor system here at Just Answers. I'm not credited for my work until you rate my answer positively using the star rating system at the top of your page. Thanks