How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask MRANSWER Your Own Question
MRANSWER
MRANSWER, Home Appliance Technician
Category: Appliance
Satisfied Customers: 6158
Experience:  30 YRS EXP. FACTORY TRAINED AND AUTHORIZED ON ALL MAJOR BRANDS
13971964
Type Your Appliance Question Here...
MRANSWER is online now
A new question is answered every 9 seconds

Will not start or show display until unplugging power cord

Customer Question

will not start or show display until unplugging power cord pause then plug back in; machine will work fine until finished with wash and shuts down normaly but to restart to use again will have to unplug power cord pause and plug back in to get any display to start machine. model wm2701h
Submitted: 10 months ago.
Category: Appliance
Expert:  MRANSWER replied 10 months ago.

Replace the door lock assembly- it is not recognizing that you are opening the door when the wash is done and therefore not allowing another cycle to start. This is easily done in about 10 minutes.